www.rfm.com e-mail: info@rfm.com page 1 of 3 ? 2009-2012 by rf monolithics, inc. XVT9010 - 2/21/12 electrical characteristics characteristic sym notes minimum typical maximum units nominal frequency fo 10.000000 mhz component storage temperature range -55 +125 c storage temperature range in tape and reel -40 +85 c soldering profile, 10 seconds, up to 5 cycles 260 c operating temperature range -40 +85 c power supply voltage vcc 3.14 3.30 3.46 v output voltage with load 10 pf||10 k ? vout 0.8 v p-p output waveform clipped sinewave power supply current icc 2.0 ma control voltage vcon 1.51.0 v control voltage input impedance 100k ohms frequency tolerance, vcontrol = 1.50 v 1.0 ppm max @ 25 c 2 c frequency stability versus: temperature, -40 to 85 c 0.5 ppm supply voltage, 3.14 to 3.46 v 0.2 ppm load 10 pf||10 k ?? 10% 0.2 ppm control voltage frequency range (1.5 1.0 v) 5 ppm/v start up time, 90% of final rf level in v p-p 2.0 ms aging @ 25 c 1 ppm/year harmonics -5.0 dbc ssb phase noise @ 1 khz carrier offset -135 dbc/hz stanard shipping quantity on 180 mm (7?) reel 1000 units lid symbolization 9010 - ywws sm3225-4 case ? voltage controlled temperature compensated crystal oscillator ? excellent frequency stability & low phase noise ? 3.2 x 2.5 x 1.2 mm surface-mount case ? complies with directive 2002/95/ec (rohs) 10.000000 mhz vctcxo XVT9010 caution: electrostatic sensitive devi ce. observe precautio ns for handling. notes: 1. the design, manufacturing process, and specifications of this device are subject to change without notice. pb
www.rfm.com e-mail: info@rfm.com page 2 of 3 ? 2009-2012 by rf monolithics, inc. XVT9010 - 2/21/12
! " # $ % & ' 4-terminal surface-mou nt seam weld case 3.2 x 2.5 mm nominal footprint sm3225-4 case application circuit pin connection 1 vcontrol 2 gnd/case gnd 3 output 4vcc top side bottom typical pcb land pattern 1 2 3 4 dimension mm inches min nom max min nom max a 3.00 3.20 3.40 0.118 0.126 0.133 b 2.30 2.50 2.70 0.091 0.098 0.106 c - - 1.20 - - 0.047 d - 3.08 - - 0.121 - e - 1.80 - - 0.071 - f - 2.38 - - 0.094 - g - 1.00 - - 0.039 - h - 0.65 - - 0.026 - i - 0.60 - - 0.024 - j - 3.60 - - 0.142 - k - 1.60 - - 0.063 - l - 2.90 - - 0.114 - m - 0.80 - - 0.031 -
www.rfm.com e-mail: info@rfm.com page 3 of 3 ? 2009-2012 by rf monolithics, inc. XVT9010 - 2/21/12 reel dimensions tape dimensions mm a0 b0 w f e p0 p1 p2 d1 d k0 t dimension 2.80 3.71 8.00 3.50 1.75 4.00 4.00 2.00 1.50 1.00 1.75 0.25 tolerance 0.10 0.10 +0.30/-0.10 0.05 0.10 0.10 0.10 0.05 +0.10/-0.00 +0.25/-0.00 0.10 0.02 mm a b c d e f g h t1 t2 t3 dimension 180 60 13.0 2.0 9.1 2.9 4.9 3.9 9.0 11.4 1.2 tolerance 1.0 +1.0/-0.0 0.2 0.5 0.5 0.5 0.5 0.5 0.3 1.0 0.1
|
